Fundamentals of Semiconductor Devices and Transistor Circuits
Learn how to model semiconductor devices, analyze transistor operation, and design foundational analog and digital microelectronic circuits.
-
💬
AI 강사
어떤 강의든 질문하면 언제든 즉시 명확한 답을 받을 수 있어요. -
🕐
언제든지 시작
정해진 일정이나 마감이 없어요 — 원할 때 자신의 속도로 배우세요. -
🌐
한국어로
강의, 과제, 수료증까지 — 모두 완전히 당신의 언어로.
이 과정 소개
Microelectronic circuits are the building blocks of all modern technology, from simple sensors to complex computing systems. Mastering this domain requires a deep understanding of semiconductor device physics and circuit modeling techniques. By the end of this course, you will have the essential foundation to analyze the behavior of diodes and transistors (BJTs and MOSFETs), apply large-signal and small-signal modeling techniques, and design basic amplifier stages and digital logic gates. You will transition from theoretical concepts to practical circuit analysis using industry-standard models.
What you'll learn:
* Understand the basic physics and operation of semiconductor diodes and their application in simple circuits.
* Master the operational principles and biasing techniques for Bipolar Junction Transistors (BJTs) and Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs).
* Apply large-signal and small-signal modeling techniques to analyze the DC operating point and AC performance of transistor circuits.
* Design foundational single-stage amplifier circuits, including common-emitter and common-source configurations.
* Practice analyzing transistor circuits used in basic digital logic gates and integrated circuit architectures.
* Configure device models for simulation, understanding the relationship between physical parameters and circuit performance characteristics.
The course begins with fundamental semiconductor physics and diode models before moving into the detailed operation and modeling of transistors (BJTs and MOSFETs). Subsequent sections focus on applying these models to analyze and design analog amplifiers and basic digital circuits, emphasizing both incremental and large-signal techniques. This course is specifically designed for beginners with no prior knowledge of microelectronics or semiconductor devices. A basic understanding of electrical circuit theory (Ohm's law, KVL/KCL) is helpful but not required. Start building your foundational knowledge of the devices that power the digital world.
받게 되는 것
-
📜
수료증
LinkedIn 프로필에 추가 -
💬
개인 AI 튜터
강좌에서 막혔나요? 내장 튜터에게 언제든지 무엇이든 물어보세요. -
🎧
오디오 버전 포함
화면 없이 어디서나 학습 -
♾️
평생 이용
언제든 다시 보세요, 만료 없음 -
📱
휴대폰 또는 컴퓨터
어디서든 모든 기기에서 -
💸
14일 환불
이유 묻지 않음 -
⚡
짧고 핵심적
2시간 48분의 실용 학습
리뷰
아직 리뷰가 없습니다 — 첫 경험을 공유해 보세요.
자주 묻는 질문
이 과정을 듣는 데 무엇이 필요한가요? +
인터넷이 되는 휴대폰이나 컴퓨터만 있으면 됩니다. 설치나 특별한 장비는 필요 없습니다.
결제는 어떻게 하나요? +
Stripe를 통한 카드로. 카드 정보는 저장하지 않으며 Stripe가 안전하게 처리합니다.
환불받을 수 있나요? +
네 — 14일 이내 전액 환불, 이유를 묻지 않습니다.
얼마나 오래 이용할 수 있나요? +
평생. 구매하면 과정은 당신의 것이며 언제든 다시 볼 수 있습니다.
수료증을 받을 수 있나요? +
네. 수료 시 LinkedIn 프로필에 추가할 수 있는 수료증을 받습니다.
이런 분야 학습자에게
테크
디자인
금융
마케팅
의료
교육
호스피탈리티
제조업
×2
한 번 충전하고 절반만 결제
36 000 ֏ 추가 → 200 크레딧 받기, 코스당 약 4 500 ֏입니다. 크레딧은 만료되지 않습니다.
36 000 ֏
200 크레딧
4 500 ֏ / 코스
최고의 가치
90 000 ֏
550 크레딧
4 091 ֏ / 코스
180 000 ֏
1200 크레딧
3 750 ֏ / 코스
크레딧은 모든 코스에 사용 가능하며 만료되지 않습니다.