Arduino and LabVIEW: Graphical Programming for Hardware Projects
Learn to connect your Arduino microcontrollers to LabVIEW to build intuitive graphical interfaces, log real-time sensor data, and control hardware without complex text-based code.
-
💬
مدرب ذكاء اصطناعي
اسأل عن أي درس واحصل على إجابة واضحة فورًا، في أي وقت. -
🕐
ابدأ في أي وقت
بلا جداول أو مواعيد نهائية — تعلّم بوتيرتك، وقتما يناسبك. -
🌐
بالعربية
الدروس والمهام والشهادة — كل ذلك بلغتك بالكامل.
حول هذه الدورة
Connecting hardware to software often requires writing hundreds of lines of complex text-based code. By combining the versatile Arduino microcontroller with the graphical programming power of LabVIEW, you can design functional control systems and interactive dashboards quickly and intuitively.
This text-based course guides you through the fundamental concepts of both platforms and teaches you how to make them communicate seamlessly. You will start with core terminology, learn how to configure your virtual instruments (VIs), and progress to designing custom user interfaces that interact with physical sensors and actuators in real time.
What you'll learn:
- Understand the core concepts of microcontrollers, virtual instruments, and graphical programming.
- Configure communication protocols to establish a reliable connection between Arduino and LabVIEW.
- Design clean, intuitive graphical user interfaces to monitor and control hardware inputs and outputs.
- Process and log real-time sensor data using modern data-handling techniques.
- Build custom logic inside LabVIEW to automate hardware responses based on sensor readings.
- Troubleshoot common connection, data-packet, and interface-latency issues.
We begin with the absolute basics of hardware communication and LabVIEW's visual architecture, then move step-by-step through practical interface designs and data-logging workflows. This course is designed entirely for beginners with no prior programming or electronics experience required. Start reading today and bring your hardware ideas to life with graphical control.
ما الذي ستحصل عليه
-
📜
شهادة إتمام
أضفها إلى ملفك على LinkedIn -
💬
مدرّس AI شخصي
عالق في دورة؟ اسأل مدرّسك المدمج أي شيء، في أي وقت. -
🎧
النسخة الصوتية مضمَّنة
تعلَّم أثناء تنقُّلك — دون شاشة -
♾️
وصول مدى الحياة
عُد متى شئت، بلا انتهاء -
📱
الهاتف أو الكمبيوتر
يعمل في أي مكان وعلى أي جهاز -
💸
استرداد خلال 14 يومًا
دون أسئلة -
⚡
قصير ومركَّز
2 ساعة 30 دقيقة من المحتوى التطبيقي
المراجعات
لا توجد مراجعات بعد — كن أول من يشارك تجربته.
المتعلمون أخذوا أيضًا
🔥 رائج
🎓 بشهادة
بناء أنظمة التشغيل الآلي المنزلية الذكية باستخدام منطق الإنترنت للأشياء والذكاء الاصطناعي
شهادة
تطبيق عملي
$24.99
→
🌟 اختيار الطلاب
🎓 بشهادة
إنترنت الأشياء: أسس نموذج دراجون بورد
شهادة
تطبيق عملي
$49.99
→
🎓 بشهادة
النماذج الأولية لإنترنت الأشياء: إعداد منصة DragonBoard
شهادة
تطبيق عملي
$49.99
→
🌟 اختيار الطلاب
🎓 بشهادة
Bluetooth Low Energy للأنظمة المدمجة
شهادة
تطبيق عملي
$49.99
→
الأسئلة الشائعة
ما الذي أحتاجه لأخذ هذه الدورة؟ +
يكفي هاتف أو كمبيوتر متصل بالإنترنت. بدون تثبيتات أو أجهزة خاصة.
كيف يمكنني الدفع؟ +
بالبطاقة عبر Stripe. لا نخزن بيانات البطاقة — يتولى Stripe ذلك بأمان.
هل يمكنني استرداد المال؟ +
نعم — استرداد كامل خلال 14 يومًا، دون أسئلة.
إلى متى يستمر وصولي؟ +
إلى الأبد. بمجرد الشراء، الدورة لك تعود إليها متى شئت.
هل سأحصل على شهادة؟ +
نعم. عند الإتمام ستحصل على شهادة يمكنك إضافتها إلى ملفك في LinkedIn.
مصمَّم للعاملين في
التقنية
التصميم
المالية
التسويق
الرعاية الصحية
التعليم
الضيافة
التصنيع
×2
اشحن مرة واحدة وادفع النصف
أضف $100 واحصل على 200 رصيد، بحيث تكلف كل دورة حوالي $12.50. لا تنتهي صلاحية الأرصدة أبداً.
$100
200 رصيد
$12.50 / دورة
أفضل قيمة
$250
550 رصيد
$11.36 / دورة
$500
1200 رصيد
$10.42 / دورة
الرصيد يصلح لأي دورة ولا ينتهي.